I went to the local ACE and bought 2 cans of Flex seal. So the day before the massive storm was going to hit us. Unfortunately we discovered we couldn't finance a new roof and didn't have the money or know how to get it done on my own. We were able to tarp it but wanted to get it properly fixed. ![]() There was a massive storm coming in and the last time we had rain our roof had a massive leak in it. ![]() The only reason why I even bothered with this product was because I was very desperate. Any questions just text me Machineandtoolservices web site. Ps, Be patient let it cure and dry for 3days or more, give the rubber a chance to expand into the grooves and small crevices. I will be posting some youtube videos of my CNC Mill and Band Saw running flood coolant. It's a no brainer Flex Seal works, if you do it right. Do not brush over large gaps and holes, cover first with fibre glass mesh or thin wood then brush on Flex seal. ![]() My band saw needed a coolant tank too, so i made a wooden box 1/2"thick wood 3ft x 2ft x 4inch wall height, then applied flex seal, both spray and brush on, focusing on the most likely leak areas, with thicker coat, and again no leaks. I own a machine shop I bought a small cnc mill, but it needed coolant, the coolant tank was leaking in many places, I applied both, can of seal and spray seal, (a must let it sit and cure between layers, i used 3 layers) after a few days i put water in it and tested it for 5 hours, and no leak. My Review of flex seal spray and flexseal Can.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |